Hangzhou Dunben Magnet Co., Ltd.
Main products:Alnico Magnet,NdFeB Magnet,Neocube,Cow Magnet,SmCo Magnet
Products
Contact Us
  • Contact Person : Ms. Hu Sally
  • Company Name : Hangzhou Dunben Magnet Co., Ltd.
  • Tel : 86-571-82750965
  • Fax : 86-571-82751287
  • Address : Zhejiang,Hangzhou,No. 666, West Hongda Road, Xiao Shan Economic Development Zone
  • Country/Region : China
  • Zip : 311215

alnico magnets for guitar pickup

alnico magnets for guitar pickup
Product Detailed
1.high residual induction 2.excellent temperature stability 3.relatively high energies characterize

Alnico is hard and brittle. Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances.

Alnico has a low coercive force, and is easily demagnetized if not handled with care. For optimum performance of Alnico 5, the magnetic length should be approximately 5 times the pole diameter or equivalent diameter. For example, a 0.250" diameter magnet should be about 1.250" long.

Alnico is hard and brittle, and prone to chipping and cracking. Special machining techniques must be used to machine this material. Holes must be made by EDM methods. We are fully equipped to machine these materials to your blueprint specifications.



Copyright Notice @ 2008-2012 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.